$18.97 Buy It Now or Best Offer
free,30-Day Returns
Seller Store sunshine-eshop
(96384) 98.2%,
Location: Sayreville, New Jersey
Ships to: US,
Item: 316066135397
Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:60 Days
Refund will be given as:Money Back
Country/Region of Manufacture:United States
Current:10A/30A/40A/60A/80A/100A
Material:ABS
Power Source:Solar
Type:Charge Controller
Features:LCD Display
Color:Blue/Orange
MPN:Does Not Apply
Recommended Environment:Indoor
Protection Properties:Open Circuit Overcurrent Overload,Discharge Protection,Low Voltage Protection,Open Circuit Protection,Overcharge Protection,Overcurrent Protection
Current Output:10A/30A/40A/60A/80A/100A
Unbranded:Unbranded
Application:Agriculture/Farming,Automotive,Commercial,Electronics,Home/Garden,Irrigation
Charging Mode:MPPT/PWM
Voltage Output:12V / 24V
Voltage:12V / 24V battery voltages
10-100A MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 12V/24V Charging Mode: MPPT(30A/40A/60A/100A) MPPT solar charge controller: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking. Large-screen LCD display, adjustable charging and discharging parameters. This MPPT controller has perfect SOC function, control charge current, and supply power to the loads. Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights. How To Use Q&A 1. Q: How many watts (W) of solar panels can be connected to 30A, and 60A? A: 10A Within 240W, 20A Within 480W, 30A Within 720W, 40A Within 960W, 50A Within 1200W, 60A within 1440W, 100A Within 1680W 2. Q: Does this controller support lithium batteries? A: The new controller(MPPT) is available with lead acid and lithium batteries, others not. 3. Q: My solar panel is 36V 200W, can I charge 12V battery? A: For 12V battery, solar panel working voltage can be between 17V and 23V; For 24V battery, solar panel working voltage can be between 36V and 46V. Please confirm that the power and Solar panel working voltage the are within this range. If it’s too high, it will damage the controller. 4. Q: Can the inverter be connected to the load side of the controller? A: Please connect the inverter directly to the battery and not to the load terminal of the controller. 5. Q: Does the controller have a requirement for battery capacity? A: No, as long as the voltage corresponds to it (but the maximum current of the board and the battery capacity should correspond). For example, the current of the solar panel is 5 amps, the battery capacity is preferably 50 AH, the current of the solar panel is 10 A, and the battery capacity is preferably 100 AH. Do not use a large board to charge a small battery, which may be dangerous. 6. Q: How do you connect the solar panels, batteries, and controllers? A: Please be sure to connect the battery first (to ensure that the battery is fully charged), then connect the solar panel. When disassembling, please remove the solar panel first, then remove the battery, please connect it exactly as this order, otherwise the controller and other components probably damaged. Others 1. Always keep the battery on fill voltage condition. 2. Prevent the battery from over-charging. 3. Prevent the battery from over-discharging. 4. Prevent the battery from reverse charging to solar panels during nights. 5. Reverse Polarity Protection for Battery 6. Reverse Polarity Protection for Solar Panels 7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working. 8. Thunder protection 9. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25 condition, locked by the CPU procedure, cannot adjust.) 10. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature. Product Specification Rated voltage: 12/24V Rated current: 30/40/60/100A Max. PV voltage: 50V Max. PV input power: 750W(12V) / 1500W(24V) Package Included 1 x Solar Panels Battery Charge Controller 1 x User Manual Charging Mode: MPPT+PWM(10A/30A/60A/80A/100A) – Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. – Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. – Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. – Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. – Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Specifications: Name: LCD screen solar controller Voltage: DC 12V / 24V Display: LCD screen Two Charging Modes: MPPT & PWM Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 -60 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 10A/30A/60A/80A/100A battery 12V photovoltaic system: power is respectively 100-1000W 10A/30A/60A/80A/100A battery battery 24V photovoltaic system: power is respectively 200-2000W Package Included: 1X Solar Panels Battery Charge Controller 1X User Manual Notes: 1. The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. 2. This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power. 3.The LCD display has an error of 0.2 V- 0.3 V, but this is normal 4. Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”). 5. Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation. Charging Mode: PWM(30A/60A) 1.Build-in industrial micro controller. 2.Big LCD display,all adjustable controlling parameter of the system. 3.Fully 4-stage PWM charge management. 4.Build-in all necessory protections including short-circuit protection,open-circuit protection,reverse protection,over-load protection. 5.Dual mosfet Reverse current protection ,low heat production LCD display/key and Operations: MENU:Switch between different display,or to enter/exit setting by long press. UP: Press to increase value. DOWN:Press to decrease value. System Connection: 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3.Connect the consumer to the charge regulator - plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller! Attention: 1.press the [Down] button to ON/OFF load manully at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for,regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications: Load: Light Control MPN: RBL Charging Mode:PWM Model: RBL-30A System Voltage: 12V 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(defaul,adjustable)12.0-15.0V Discharge stop voltage: 10.7V(defaul,adjustable)9.0-11.5V Discharge reconnect voltage:12.5V(defaul,adjustable)11.0-13.0V Rated current: 30A Self-consume:<10mA Batteries:Only fit for OPEN, AGM, GEL Operating Temperature:-35~60 USB output:5V/2A Max Dimension:13.4*7*3.3cm Package includes: 1x Solar Charge Controller 1x User Manual Charging Mode: MPPT(30A/50A/70A) -Automatic Identification System Voltage,12V/24V auto recognition. -Completed technical data for setup and modify. - The load control mode can be selected the timer function canbe reset for street light at night. -Discharge capacity control& Discharge Counter of Ampere Hour. -Working Storage Function record the total run time of system,Record timers of error during running time record times of full charged battery. -Solar Panels Battery Solar Charge Controller positive poles areall connected together adopting negative MOSFET in series control circuit. -LCD display &Double Button Operation :high-definition display device status. -Dual USB 2.4A fast charging ports, pure copper wiring port with good conductivity. -Six intelligent safety protection&stable output, rapid operation :Efficiency increased by 30% with high voltage protection, short circuit protection, reverse connection protection, temperature protection, overload protection, low voltage protection. -Alloy heat dissipation backplane fast heat dissipation: prevent the device from running for a long time to cause the circuit to heat up. -Widely used: RV solar panel power supply in the car, solar panel large-scale power generation system, solar panel environmental protection street light, yachts and ships. Specification Model30A/50A/70A System Voltage12V/24V Max Input Voltage of solar panel:55V Self-consumption≤10mA Max charge current:30A Max discharge current:30A LVD:11.0V ADJ 9V…12V,x2/24V LVR:12.6V ADJ 11V…13.5V,x2/24V Float Voltage:13.8V ADJ 13V…15V,x2/24V Boost charging:14.4V, *2/24V Battery Voltage less than 12V start boost charging 2 hours Battery Over Voltage:16.5V,×2/24V Reverse Connection Protection:yes Load Over Current Protection:Yes each two minutes restart once Temperature Compensation:-24 mV / for 12V system x2/24V Working Temperature-20…+55 Waterproof grade:IP32 Size :30A (L*W*H)14*3.5*17cm/5.5*1.38*6.69inch USB:5V 2.1A DC output:12V/24V Current display:None Package including 1X Charge Controller 1X Manual Charging Mode: PWM(10A/20A/30A) ✔ Using industrial-grade main control chip, real-time display of working temperature, charging current and discharge current. ✔ Large-screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control, adjustable charge and discharge parameters, with power-off memory, etc. ✔ Dual USB output, the maximum current is up to 2.5A, supporting Apple mobile phone charging. ✔ Complete 3-stage charging management, it can effectively protect the battery and make the battery more durable. ✔ Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery, without damaging the controller. ✔ Anti-backflow circuit, ultra-low heat generation, auto focus, high charging efficiency, non-stop detection. Specification: Model: K1688 Colour: Black Material:ABS System voltage: 12V/24V automatic adaptation Rated charging current: 10A/20A/30A Maximum PV voltage: 50V Maximum PV input power: 130W (12V) 260W (24V) Boost charging voltage: 14.4V Float voltage: 13.7V (default, adjustable) Discharge cut-off voltage: 10.7V (default, adjustable) Discharge recovery voltage: 12.6V (default, adjustable) Charging recovery voltage: 13V Threshold of light-controlled light-on: photovoltaic panel 8V (light-controlled light-on has a delay) Threshold of light-controlled light-off: photovoltaic panel 8V (light-controlled light-off has a delay) USB output: 2-way USB output, 5V/2.5A (maximum) Standby current: <10mA Working temperature: -35～+60℃ Size: 125*112*34mm/4.92*4.41*1.34inch Packing size: 13*10.5*3.8cm/5.12*4.13*1.50inch Package include: 1x Solar Panel Charge Controller 1x User Manual 1x Packing Box 100A 12/24/36/48V Black - LCD Liquid Crystal Display: The solar charging controller adopts an LCD liquid crystal display with backlight display, which can be clearly and intuitively displayed in the dark, one-key operation of the panel keys can adjust various system control parameters, such as float charging voltage, boost charging voltage, light control and time delay, etc. - Multiple Operating Modes: This solar charge controller has seven operating modes, such as charging mode, light control mode, light and time delay control mode, universal control mode, manual control mode, timing control mode and testing mode, among them, test mode is only available to the factory test. - Large-section Wiring Port: use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses. - Dual USB Charging Ports: The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc. - Thickened Aluminum Alloy Heat Sink: The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃, at the same time, it is equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protection and reverse polarity protection, etc. Specification: Model: SY-12/24/36/48V100A Colour: Black Maximum charging current: 100A Maximum input voltage of photovoltaic panels: 23V (12V), 45V (24V), 69V (36V), 90V (48V) Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V) Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USB Working temperature: -25℃~55℃ Cooling method: heat sink self-cooling Charging method: Focused MPPT modulation charging Working mode: seven Protection function: prevent overcharge, overvoltage/DC output low voltage, high voltage protection, reverse polarity protection, etc. Product size (L*W*H): 195*183*68mm/7.68*7.20*2.68inch Package size (L*W*H): 205*205*70mm/8.07*8.07*2.76inch Package includes: 1 x Solar Charge Controller 1 x Manual PaymentsDelivery detailsReturn and exchangeFeedback & RatingContact usPaymentsPayments: Paypal, Google Pay, Visa, Master Card, Amerian Express, Discover. Delivery detailsAll items are shipped from US warehouse located at NJ. We ship to your eBay or Paypal address. Please make sure your eBay or Paypal address is correct before you pay. Return and exchangeFree returnFeedback & RatingPls contact our customer service firstly if have any problems , we will help to solve the issue, and could offer free return service for full refund or free replacement after confirming. You can buy from us with confidence Contact usIf have any problems, please feel free to contact us.On Dec 20, 2024 at 05:05:45 PST, seller added the following information:
Frequently Asked Questions About 12/24V MPPT PWM REGULADOR DE BATERÍA SOLAR PANEL CONTROLADOR INVERSOR DE CARGA in My Website
biesalab.org is the best online shopping platform where you can buy 12/24V MPPT PWM REGULADOR DE BATERÍA SOLAR PANEL CONTROLADOR INVERSOR DE CARGA from renowned brand(s). biesalab.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling 12/24V MPPT PWM REGULADOR DE BATERÍA SOLAR PANEL CONTROLADOR INVERSOR DE CARGA on biesalab.org?
biesalab.org helps you to shop online and delivers We11done to your doorstep. The best-selling We11done on biesalab.org are: Weldon WE11DONE 2021 BLACK WOOL SILK SLIT DETAIL LONG DRESS HALTER NECK XS Used 58mm Espresso Tamper and Distributor Dual-Head for 58mm Portafilter – Adjusta… Handheld Vacuum, 13000Pa Cordless Handheld Vacuum, 120W High Power Wet and Dr… Handheld Vacuum, 13000Pa Cordless Handheld Vacuum, 120W High Power Wet and Dr… We11done Women Black Swimsuit Cover Up M WE11DONE Logo T-shirt Size L WE11DONE Logo T-shirt Size L WE11DONE Logo T-shirt Size S WE11DONE Logo T-shirt Size L We11done Cardigan Size L Brown/Beige. Perfect condition. WE11DONE Logo T-shirt Size L We11done Women Pink Pullover Hoodie S Handheld Vacuum, 13000Pa Cordless Handheld Vacuum, 120W High Power Wet and Dr… We11done Cream Sweater Print Text Washed Ivory EUC Pullover Casual Size Large WE11DONE Blue Oversized Logo Hoodie Cotton Sweatshirt Adult Size Small WE11DONE Logo T-shirt Size S WE11DONE Logo T-shirt Size L WE11DONE Logo T-shirt Size L WE11DONE Logo T-shirt Size S WE11DONE Logo T-shirt Size L WE11DONE Logo T-shirt Size S WE11DONE Logo T-shirt Size L WE11DONE Cream Yellow Boucle Pile Knit Wool Blend Oversized Sweater Unisex Small We11done Brown Coat SizeS Oversized ，Embossed logo on back We11done Jean Jacket，Dark Wash Graffiti Spell Out Logo We11done Coat. Size S. Navy Color. Perfect Condition. Authentic. We11done Lime Green Women’s Corduroy Oversized Jacket Size XS WE11DONE WASHED LOGO TEE – AUTHENTIC – NEW WITH TAGS we11done Circle Logo Embroidered Cropped Cotton Hoodie in Baby Blue One Size WE11DONE Black PF20 Collection Sweater – Size S We11done Orange Big Logo All Over Hoodie Medium oversized streetwear We11done Ivory Logo-Print Cotton T-shirt – Size S WE11 DONE Pink Cotton Sweatshirt We11done Women Pink Corduroy Jacket M WE11 DONE Maglieria WE11 DONE Maglieria We11done Women Black Long Sleeve Top S Welldone We11done Monogram Buttoned Wool Cardigan WE11 DONE Navy Blue Satin Mini Skirt XS We11Done Well Done Oversize Football 70-0411-3 WE11 DONE Logoed Baseball Cap WE11 DONE Pants M [Japan Used Fashion] Weldon We11Done 22Aw Wave Line Logo Print Hoodie Long Sleev WE11DONE/Sleeve buckle gathered belt oversize shirt/L/Polyester/BLK WE11 DONE Maglieria M WE11 DONE Maglieria M WE11 DONE Jeans WE11 DONE Black Denim Jacket S WE11 DONE Jeans WE11 DONE Jeans M WE11 DONE Jeans M WE11 DONE Short S WE11 DONE Pants M WE11 DONE Jeans Handheld Vacuum, 13000Pa Cordless Handheld Vacuum, 120W High Power Wet and Dr… Handheld Vacuum 13000Pa Cordless Handheld Vacuum 120W High Power Wet and Dry … Mens Pullover Fleece Hoodie