Condition: Brand New item unused unopened in original
sealed package

Function

•            Cooling
•            Heating
•            Dehumidification
•            Air
  Purification

Description

•          Two Zone Air Condition with Heat Pump
•          One
  Outdoor unit with 2 Indoor  air handler units (12000 BTU, 12000 BTU)
•          24000
  BTU Heating Cooling And Dehumidification
•          22 SEER DC Inverter Compressor from Mitsubishi
•          Super
  Quiet Auto Restart, digital Timer and Turbo Mode

Feature

• Variable Speed Compressor
• 21 SEER efficiency, DC inverter technology
• AHRI certified
• Whisper-quiet operation, Low voltage start 
•  Stable
  Operation at Low Frequency
•  Random
  pitch cross flow fan wheel
•  Dry
  anti-mould coil
•  LCD
  display, Turbo mode, 3 fan speeds 
•  Quick
  access, washable air filter
•  Auto level
  swing, Wide angle air distribution, Auto Restart,
•  24-hour
  programmable timer, Sleep mode, Independent  Dehumidification 
•  Enhanced
  copper/coil, Corrosion resistant cabinet, Thoroughly tested ensure longer
  performance

YMGI Smart Technologies

•  Auto-Restart:
  After a power cut the unit will restart automatically with the previous
  function setting when the power returns.
• Intelligent Auto-Defrosting: The unit can enter or quit the defrosting mode
  automatically by timely detecting the frosting situation of the outdoor
  unit.
• Sleep Mode: Because our body temperature cools down as we sleep,
  the unit automatically adjusts the setting for all-night comfort.
• Air Purifying and Deodorizing
  Filters: Industrial development has offered from one side a
  better life style, but on the other side, it has increased polluting
  substances presence in the air that helps in spreading of various kinds of
  diseases. Among the polluting agents, the ones we can more frequently find
  at home are anti-bacterial dust particles, moulds and etc, which are
  causing allergic phenomenon, breathing and typical upper respiratory
  problems. This dual washable filter screen is effective in preventing
  anti-bacteria mould and duct particles and ensuring a healthy indoor
  environment.
• Turbo Mode: This function enables the unit to reach the preset
  temperature in the shortest time.
• Self-diagnosis and
  Auto-Protection Function: This
  function can electronically detect the errors and display the diagnosis by
  a series of flashing LEDs on the indoor unit. Then the unit will
  automatically switch to protection mode.

IMPORTANT NOTES ABOUT THE DC INVERTER SYSTEM VARIOUS PERFORMANCES:

• The rated performance data printed on the nameplate
  were tested per AHRI 210/240 standards at standard indoor & outdoor
  conditions and standard installation set-up.
• Actually the DC inverter outdoor unit could modulate to
  match whatever capacity needs are called/requested from indoor side, to
  produce a wide range of capacities, minimum could be about 15% of the
  rated number and maximum could be around 160% of the rated number.
• Once the DC inverter system is installed, each indoor
  unit’s output and so the outdoor unit performance will all vary over the
  operation period: soft starting, turbo quick cooling/heating, maintaining,
  defrosting, switching, and other condition changes.
•  Actual
  performance varies upon many factors such as indoor and outdoor
  temperatures, inter-connecting pipe length/ bending, elevation difference
  between indoor and outdoor units, refrigerant charging level, vacuum
  level, leakage, air or moisture or contamination level, foreign substance
  left in the piping, indoor filter clean level, indoor and outdoor coil
  conditions, and other factors.
• When the rated total capacity of all the indoor units
  exceeds the rated capacity of outdoor unit, each indoor unit may not
  output the rated capacity and one may differ from other, upon other
  installation/operation factors, it all units are turned on to run
  compressor simultaneously.

PIPE ADAPTER

• Whenever the outdoor unit gas valve of size 3/8″
  is to connect with indoor unit gas pipe of 1/2″ or 5/8″, one
  3/8″ – 1/2″ or 3/8″ – 5/8″ adaptor is to be used in
  between. This reducer is packed separately and shall be installed at job
  site.
• Any indoor unit is 30′ or more apart from the outdoor
  unit, better to adjust refrigerant. If it is 50′ or more apart, better to
  upper size the copper lines and adjust refrigerant.
• Any run cannot be more than 100′ apart from the outdoor
  unit; otherwise, that indoor unit capacity may be reduced
•